“Stay steady, stay safe with Co-Witnessing Sights and Handguards for your AR15.”
Benefits of Co-Witnessing Sights with Handguards
Co-witnessing sights with handguards is a popular practice among AR15 shooters for a variety of reasons. In this article, we will explore the benefits of co-witnessing sights with handguards and provide a step-by-step guide on how to do it effectively.
One of the main benefits of co-witnessing sights with handguards is increased accuracy. By aligning your iron sights with your red dot or holographic sight, you can ensure that your shots are on target every time. This can be especially useful in high-pressure situations where split-second accuracy is crucial.
Another benefit of co-witnessing sights with handguards is improved versatility. By having both iron sights and a red dot or holographic sight on your rifle, you can quickly switch between the two depending on the situation. This can be particularly useful in close-quarters combat or when engaging targets at different distances.
Additionally, co-witnessing sights with handguards can help you maintain your sight picture in adverse conditions. If your red dot or holographic sight becomes damaged or malfunctions, you can rely on your iron sights to keep you on target. This added layer of redundancy can be a lifesaver in a critical situation.
Now that we’ve covered the benefits of co-witnessing sights with handguards, let’s move on to the practical steps of how to do it. The first step is to ensure that your handguard is compatible with co-witnessing sights. Most modern handguards are designed to accommodate co-witnessing, but it’s always a good idea to double-check before making any modifications.
Next, you’ll need to install your iron sights and red dot or holographic sight on your rifle. Make sure that both sights are properly zeroed before attempting to co-witness them. This will ensure that your shots are accurate when using either sight.
Once your sights are installed and zeroed, you can begin the process of co-witnessing them. Start by aligning your iron sights with your red dot or holographic sight. This can be done by adjusting the height of your iron sights or the position of your red dot or holographic sight until they are in perfect alignment.
Once your sights are co-witnessed, it’s important to practice using them in different shooting scenarios. This will help you become familiar with how your sights work together and how to quickly switch between them when needed. Remember, practice makes perfect, so don’t be afraid to spend some time at the range honing your skills.
In conclusion, co-witnessing sights with handguards is a valuable practice for AR15 shooters looking to improve their accuracy, versatility, and reliability in the field. By following the steps outlined in this article, you can effectively co-witness your sights and take your shooting skills to the next level. So grab your rifle, head to the range, and start co-witnessing today!
Step-by-Step Guide to Installing Co-Witnessing Sights on AR15 Handguards
If you’re an AR15 shooter looking to enhance your shooting experience, co-witnessing sights with handguards is a great way to improve your accuracy and overall performance. Co-witnessing sights allow you to align your iron sights with your red dot or holographic sight, giving you a more precise aiming point. In this article, we’ll walk you through the step-by-step process of installing co-witnessing sights on your AR15 handguards.
First and foremost, it’s important to gather all the necessary tools and materials before you begin the installation process. You’ll need a set of co-witnessing sights, a handguard that is compatible with co-witnessing sights, a screwdriver or Allen wrench, and any additional tools specified by the manufacturer of your sights.
Once you have all your tools and materials ready, the next step is to remove your existing sights from your AR15. This can usually be done by unscrewing the screws or bolts that hold the sights in place. Make sure to keep track of all the screws and bolts you remove, as you’ll need them to attach your new co-witnessing sights.
After removing your old sights, it’s time to attach your new co-witnessing sights to your handguard. Start by aligning the sights with the mounting holes on the handguard, and then use the screws or bolts provided to secure the sights in place. Make sure to tighten the screws or bolts securely to ensure that your sights are properly attached.
Once your co-witnessing sights are securely attached to your handguard, the next step is to adjust the sights to ensure they are properly aligned with your red dot or holographic sight. This can usually be done by adjusting the windage and elevation knobs on the sights until they are aligned with your primary sight.
After adjusting your co-witnessing sights, it’s important to test them out at the range to ensure they are properly zeroed. Start by shooting a few rounds at a target and adjusting the sights as needed to ensure you are hitting your target accurately. It may take some trial and error to get your sights properly zeroed, so be patient and persistent.
In conclusion, installing co-witnessing sights on your AR15 handguards is a great way to improve your shooting accuracy and overall performance. By following the step-by-step guide outlined in this article, you can easily install co-witnessing sights on your AR15 and start enjoying the benefits of a more precise aiming point. So grab your tools and materials, and get ready to take your shooting to the next level with co-witnessing sights!
Choosing the Right Co-Witnessing Sights for Your AR15
If you’re an AR15 shooter looking to enhance your shooting experience, co-witnessing sights with handguards is a great way to improve your accuracy and overall performance. Co-witnessing sights allow you to align your iron sights with your optic sight, providing you with a clear and precise aiming point. In this article, we’ll discuss how to choose the right co-witnessing sights for your AR15 and provide you with some tips on how to properly install and use them.
When it comes to choosing co-witnessing sights for your AR15, there are a few factors to consider. First and foremost, you’ll want to make sure that the sights are compatible with your specific handguard. Some handguards may not have enough clearance for certain types of sights, so it’s important to do your research and choose sights that will fit properly on your rifle.
Additionally, you’ll want to consider the type of sights that will work best for your shooting style. There are two main types of co-witnessing sights: absolute co-witness and lower 1/3 co-witness. Absolute co-witness sights align with the center of your optic sight, while lower 1/3 co-witness sights align slightly below the center. Both types have their own advantages, so it’s important to choose the one that best suits your needs.
Once you’ve chosen the right co-witnessing sights for your AR15, it’s time to install them. The installation process will vary depending on the type of sights you’ve chosen, so be sure to follow the manufacturer’s instructions carefully. In general, you’ll need to remove your existing sights and attach the new co-witnessing sights to your handguard using the provided hardware.
After you’ve installed your co-witnessing sights, it’s important to zero them properly. This involves adjusting the sights so that they align with your optic sight and provide you with an accurate aiming point. To zero your sights, you’ll need to take your rifle to the range and make adjustments based on where your shots are landing. It may take some trial and error, but with patience and practice, you’ll be able to zero your sights effectively.
Once your co-witnessing sights are properly installed and zeroed, it’s time to put them to use. Co-witnessing sights can greatly improve your accuracy and precision when shooting, so be sure to take advantage of their benefits. Practice using your sights in various shooting scenarios to get a feel for how they work and how they can help you improve your shooting skills.
In conclusion, co-witnessing sights with handguards can be a valuable addition to your AR15 setup. By choosing the right sights, installing them properly, and zeroing them effectively, you can enhance your shooting experience and take your skills to the next level. So why wait? Upgrade your AR15 with co-witnessing sights today and see the difference for yourself. Happy shooting!
Tips for Zeroing Co-Witnessing Sights with Handguards
Co-witnessing sights with handguards on an AR15 can be a bit tricky, but with the right approach and some patience, you can achieve a perfect zero. In this article, we will provide you with some tips on how to zero your co-witnessing sights with handguards effectively.
First and foremost, it is essential to understand the concept of co-witnessing sights. Co-witnessing refers to aligning your iron sights with your red dot or holographic sight. This allows you to have a backup sighting system in case your primary optic fails. When co-witnessing sights with handguards, you need to ensure that both your iron sights and your red dot or holographic sight are zeroed in at the same point of impact.
To begin zeroing your co-witnessing sights, start by mounting your red dot or holographic sight on your AR15. Make sure it is securely attached and properly aligned with your iron sights. Once your optic is mounted, it’s time to zero it in.
When zeroing your red dot or holographic sight, start by shooting at a target at a distance of around 25 yards. Adjust the windage and elevation settings on your optic until your shots are hitting the bullseye consistently. Once you have zeroed in your red dot or holographic sight, it’s time to move on to zeroing your iron sights.
To zero your iron sights, you will need to adjust the front and rear sights to align with your red dot or holographic sight. Start by adjusting the front sight post up or down to match the point of impact of your red dot or holographic sight. Then, adjust the rear sight windage to ensure that your iron sights are aligned with your red dot or holographic sight.
Once you have zeroed in both your red dot or holographic sight and your iron sights, it’s time to co-witness them. To do this, look through your red dot or holographic sight and align your iron sights with the reticle. Your iron sights should be visible at the bottom of the sight picture, allowing you to use them as a backup sighting system.
When co-witnessing sights with handguards, it’s essential to ensure that your iron sights are not obstructed by your handguard. If your handguard is blocking your iron sights, you may need to adjust the height of your front sight post or consider using a riser for your red dot or holographic sight.
In conclusion, zeroing co-witnessing sights with handguards on an AR15 requires patience and attention to detail. By following the tips outlined in this article, you can achieve a perfect zero and have a reliable backup sighting system for your rifle. Remember to practice regularly to maintain your zero and ensure that your co-witnessing sights are always ready for action.
Troubleshooting Common Issues with Co-Witnessing Sights on AR15s
Co-witnessing sights on an AR15 can be a great way to enhance your shooting accuracy and overall experience with your rifle. However, there are some common issues that shooters may encounter when trying to co-witness their sights with handguards. In this article, we will discuss these issues and provide some troubleshooting tips to help you get the most out of your co-witnessing setup.
One common issue that shooters may encounter when trying to co-witness their sights with handguards is a misalignment between the sights and the target. This can be caused by a number of factors, such as improper installation of the sights or handguards, or a misalignment of the rifle itself. To troubleshoot this issue, first ensure that your sights are properly installed and aligned according to the manufacturer’s instructions. If the sights are properly installed, check to see if the handguards are properly aligned with the barrel of the rifle. If not, adjust the handguards as needed to ensure proper alignment.
Another common issue that shooters may encounter when co-witnessing sights with handguards is a lack of visibility of the sights due to obstructions or reflections. This can be caused by a number of factors, such as the position of the shooter’s head or the angle of the sights relative to the target. To troubleshoot this issue, first ensure that your head is positioned properly behind the sights to ensure maximum visibility. If visibility is still an issue, try adjusting the angle of the sights or the position of the handguards to reduce obstructions and reflections.
One final common issue that shooters may encounter when co-witnessing sights with handguards is a lack of consistency in sight picture and accuracy. This can be caused by a number of factors, such as inconsistent mounting of the sights or handguards, or a lack of proper sight alignment. To troubleshoot this issue, first ensure that your sights are securely mounted to the rifle and that they are properly aligned with each other. If sight picture and accuracy are still inconsistent, practice proper sight alignment and trigger control to improve your shooting consistency.
In conclusion, co-witnessing sights with handguards on an AR15 can be a great way to enhance your shooting experience and accuracy. However, there are some common issues that shooters may encounter when trying to co-witness their sights with handguards. By following the troubleshooting tips provided in this article, you can address these issues and get the most out of your co-witnessing setup. Remember to always practice proper shooting techniques and safety precautions when using your AR15, and happy shooting!
